How to Spool a Baitcaster with Braid Line

In fishing, fun boosts the highest level as it performed with Baitcasting reel With Braided Line. Therefore, these experiences start with learning how to spool a baitcaster with braid line correctly.

Initially, it may look frustrating task. But learning helps to be perfect. Additionally, it's so simple and doesn't take many times.

In this article, we will explain all Baitcasting reel With Braided Line related things you should know. So please read the article till last.

How to spool a baitcaster by yourself might look scary at first. But you will find no fear if you use these tips.

For spooling a baitcaster reel, you need best baitcasting rod and some supplies. After getting you may begin the process.

Firstly, you have to attach your reel to your fishing rod. Then you have to feed the line throughout the eyelet of the rod. After that, you can join this eyelet to the reel spool. Especially it is recommended that you should feed the line throughout the worm guide.

Then you have to wrap the line around the spool and tie around the mainline. Tying by overhand and pulling the mainline until knots tighten down is called an arbor knot.

Next, you can start spooling reel. In this case, you may need help from a friend. Just get your pencil through the hole of the spool and hold the line vertically. Put some tension on it and start to reel and fill up the spindle. If you don't have anyone there, you can use your fishing line spooler to house the filler spool.

To prevent any fault, you need the fishing line to come off its filler spool. As your reel spool feeds at the bottom of its turn, you need spool to feed off the top. A useful tip is; once reel loses tape another fill up. You are carrying it until almost become full. For smooth casting, you need to leave one- eighth of an inch from the edge of the spool.

Finally, trim your spooled line from its package spool and throughout the lasting eyelets on the rods.

How to Cast a Baitcaster

Before we get started how to cast a baitcaster, you may need to know what size braid for baitcaster. As spinning reels usually use for finesse looks and glower baits, an excellent rule of thumb is the size between 6 and 12 lb. fluorocarbon or monofilament. Besides, for spinning rods, the size is 10 to 30 lb.

Here are the Guides for Casting a Baitcaster


Before starting to ensure the baitcasting reel, you are using connect with the correct rod. You have to use a 6-foot, 6-inch central massive rod to a 6-foot, 10-inch central heavy rod.


Then you have to use a heavy line to learn the baitcasting essentials. To cast firstly, 15 to 17-pound monofilament line will be most comfortable. It will help you to ignore backlashes.


To put the suitable star drag and spool tension, Refer to the owner's manual.


To ensure your lure falls gradually and softly to the ground, Hold your rod out flat and depress the thumb bar.


You have to carry the rod back over your shoulder to make ready for your cast.


As maintaining pressure on the line spool with your thumb Depress the thumb.


Then make the aim for your target.


When you begin your cast, you have to use firm pressure on the spool with your thumb. It will help you to prevent the reel from over-winding. Especial notice to this part will aid you to ignore backlash. Next, slowly back off on the pressure. It will feather your line out throughout the rest of the cast.


Finally reel once or two times to connect the anti-reverse, and then you are ready to fish.

Here is some Best line for Baitcaster for your fishing

  1. 1
    Spiderwire Ultracast Invisi-Braid Superline.
  2. 2
    KastKing SuperPower Braided Line.
  3. 3
    KastKing Masters Tournament Grade Monofilament.
  4. 4
    Seaguar Red Label Fluorocarbon.

How to Spool Braid on a Spinning Reel


While spooling ensure you wear a wet cloth to run the line.


Use your material to keep the track tight in your hands in the entire process. Your path will not stick to the spool the way you desire it if you give up pressure for even a second.


Never forget to flip the bail before you tie the knot.


If you want maximum casting and performance, you should try to shoot for 1/8 of an inch left on your spinning reel. This shoot will be between the end of the line and the end of the spool.

How to Spool a Baitcaster with Braid

When a question comes how to spool a baitcaster with braid line, it's always a little different from other methods.

Don't set the braid straight onto a fishing reel as it doesn't have traction and it will just slide around your fishing spool. Besides, for the support, you can use a single strand of individual-made fiber. Remember this is the best way to save money on the fishing line.

  • Until you get the support on your fishing spool, you should need to follow the above ways.
  • To attach the single-strand fishing line, use a double uni-knot.
  • If you don't have any company, you can use a Reel Spooling Station.
  • If you want to put inflexibility on the line, you can use your index and thumb finger.
  • You should begin with the reel.
  • Next, you have to fill the spool up to 1/8 inch from the top of the reel.
  • Ultimately, you can fruitfully put baitcasting reel with braided line, and you are ready to go for fishing.


While fishing the baitcasting reel with braided line gives in attractive results, and it's a simple device. Currently, this fishing tool is one of the extremely popular out in the shop. Besides, when you get knowledge about how to spool a baitcaster with braid Line, this will change your fishing experience. You can also read how to spool a spinning reel open guideline for beginners.

Copy link
Powered by Social Snap